KONE KCE Elevator 5-Party Intercom Replacement Guide
2026-09-29 10:27:18
KONE KCE Elevator 5-Party Intercom Replacement Guide
I. Pre-replacement Preparations
Just as a surgeon prepares all instruments before an operation, full preparation is required before replacing the 5-party intercom:
Tool List: Phillips screwdriver, multimeter, electrical insulating tape
Safety Measures: Confirm the elevator is in inspection state and disconnect the main power supply
Parts Check: Verify that the new intercom device model matches the old one
II. Step-by-step Replacement Operation Process
The actual operation is like assembling a puzzle — the key is to follow the sequence strictly:
Remove the old device panel, taking care to keep all fixing screws
Mark and disconnect each connecting wire one by one; it is recommended to take photos for record
Install the new main unit, and connect the wires correspondingly according to the marks
Carry out preliminary power-on test after the device is securely fixed
III. System Test and Verification
Installation does not mean it is ready for use — a comprehensive check is required just like a physical examination:
Test call quality on every floor to ensure no noise or interference
Check the response speed of the emergency call function
Verify the signal reception stability of the monitoring center
Observe the working status of the device indicator lights
Next：KONE KDS330 LCD Hall Call Pane
Previous：How to choose the elevator acc
